Tilaa viimeistään 18.12. saadaksesi toimituksesi ennen joulua. Koskee varastotuotteita.


IBM Lenovo Intelligent Copper Pass-thru Module for IBM BladeCenter

1 699,50 € Ilman ALV
  • Varastostatus: Ei varastotuote
  • Toimitus alkaen: 8,50 €
  • Tuotenumero
  • 5010435473
  • Valm. tuotenro.
  • 44W4483

Lyhyt kuvaus


Tärkeimmät ominaisuudet

  • Connection with up to 14 blade servers via 14-port copper ports
  • Direct one-one mapping to each blade server
  • Up to 1GB operation on uplinks
  • SoL support in bay 1
  • CKVM support in bay 1
  • Simple setup and monitoring via AMM
  • Standard switch form factor


  • Self-test and diagnostics capability
  • Simple connectivity - no special cables to buy
  • Configure to order capability


The Intelligent Copper Pass-thru Module (ICPM) for IBM BladeCenter (44W4483) is a low-cost solution, ideal for clients who want to use their existing switching infrastructure with IBM BladeCenter. It does not require any configuration and so is very easy to use.Pass-thru modules are I/O options that can be used for direct connections of blade ports to the external infrastructure devices such as network switches. The Pass-thru module is almost like a traditional network patch-panel - it routes internal blade ports to outside the BladeCenter. Current modules (used in non-high-speed bays) use a design that links several internal blade ports to a single external port on pass-thru module, so specific "hydra" or "octopus" pass-thru cables have to be used with pass-thru modules to provide standard external connections (one connector per each blade port).ICPM provides an unconfigured network connection that enables the blade servers in the BladeCenter unit to connect to an existing network infrastructure. No configuration of the copper pass-thru module is required. The ICPM provides a single connection from each blade to one RJ-45 connector, which can go directly to an external switch or patch panel from each of the 14 blades in the chassis to an RJ-45 plus for connection.If you install the ICPM in bay 1 of the chassis, it will route all Ethernet signals from controller 1 in each blade. Similarly, if you put an ICPM in bay 2, it will route all Ethernet controller 2 signals from each blade server.The ICPM has additional benefits such as support for SoL (Serial-over-LAN), concurrent KVM (cKVM), and security and statistics functionality - all through the existing BladeCenter advanced management module GUI.

Tekniset tiedot

Valmistaja IBM
Koko tai muoto Vaihtomoduuli
Verkkotyyppi Laajennusmoduuli
Laitetyyppi Expansion module
Liitännät 14 ( internal ) ¦ 14 - RJ-45 ( external ) ¦ 2 x management (100Base-TX) ( internal )
Verkko ja kommunikointi
Liitäntätekniikka Langallinen
Tiedonsiirtoprotokolla 100Mb LAN, Gigabit LAN
Yhteyskäytäntö Fast Ethernet, Gigabit Ethernet
Tiedonsiirtonopeus 1000 Mbps
Hyväksynnät ja luokitukset IEEE 802.3ae
Hyväksynnät ja luokitukset FCC Class A certified, C-Tick, CISPR 22 Class A, EN55022, EN55024, UL 60950-1, IEC 60950-1, CSA C22.2 No. 60950-1-03, RoHS
Mitat ja Paino
Leveys 2.9 cm
Syvyys 26 cm
Korkeus 11.2 cm
Kaapelointityyppi Ethernet 100Base-TX, Ethernet 1000Base-T
Form Factor Plug-in module
Huolto & Tuki
Huolto ja tuki 1 vuoden takuu
Tarkemmat huolto- ja tukitiedot Limited warranty - 1 year