Netgear ProSAFE M4300-8X8F

1 849,50 € Ilman ALV
  • Varastostatus: Ei varastotuote
  • Toimitus alkaen: 8,50 €
  • Tuotenumero
  • 5010946874
  • Valm. tuotenro.
  • XSM4316S-100NES

Lyhyt kuvaus


Tärkeimmät ominaisuudet

  • The M4300-8X8F half-width switch provides 8-port 10GBASE-T and 8-port 10GBASE-X SFP+
  • All (16) 10G ports are independent and 1G backward compatible for progressive transition to 10G speeds
  • With 320Gbps non-blocking fabric, M4300-8X8F delivers L2/L3/L4 and IPv4/IPv6 rich services for virtualization (Auto-iSCSI prioritization), server / storage interconnect and SMB core applications
  • Virtual Chassis stacking provides non-stop forwarding (NSF) and hitless failover for highest availability (HA)
  • Two half-width M4300 10GbE models can be paired in a single rack space for redundant top-of-rack and active-active server installations


The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing – as standard. Perfect for wireless access, unified communications and IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.

Best-in-class stacking

Flexible stacking

M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables)


High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption

Lower complexity

Advanced L2 switching and L3 routing

Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license.

Automated configuration

DHCP/BootP innovative auto-installation including firmware and configuration file upload automation

Higher flexibility

  • Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization
  • 10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds

    Investment protection

  • Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks
  • Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection

    Key features:

  • Cost effective 1G access layer in campus LAN networks, and high performance 10G distribution layer for midsize organizations networks
  • Advanced Layer 2, Layer 3 and Layer 4 feature set - no license required - including Policy Based Routing, RIP, VRRP, OSPF and PIM
  • Innovative mixed "Spine and Leaf", 1G and 10G stacking with nonstop forwarding and hitless failover redundancy
  • Low acoustics, half-width 16-port and 24-port 10G models can be paired in a single rack space for redundant Top of Rack
  • Up to 384 (Gigabit) ports, or 384 (10 Gigabit) ports, or a combination of both in a single logical switch
  • PoE+ (30 watts per port) with hot swap, redundant power supplies and full provisioning
  • 48-port 10G models ultra-low latency and scalable table size with 128K MAC, 8K ARP/NDP, 4K VLANs, 12K routes
  • Mixed Stack of 1G and 10G models provides 16K MAC, 2K ARP/NDP, 4K VLANs and 512 routes
  • SDN-Ready OpenFlow 1.3 support for maximum investment protection

  • Tekniset tiedot

    Valmistaja NETGEAR
    Tuotelinja NETGEAR ProSAFE
    Malli M4300-8X8F
    Tyyppi Kytkin, 10/100/1000/10000, 10 Gigabit SFP+, Sisäinen virtalähde, AC 120/230 V, NETGEAR elinikäinen takuu
    Koko ja muoto Räkkiin asennettava
    Määrä 8
    Liitännät 1 x konsoli (mini-USB), 1 x hallinta (Gigabit LAN) RJ-45, 1 x USB Type A, 8 x 10GBase-T RJ-45, 8 x 10GBase-X SFP+, 1 x serial (RS-232) RJ-45
    Korkeus (Telineyksiköt) 1 *U
    Hallinnoitu Kyllä
    Pinottava Pinottava
    Pinon enimmäisyksikkömäärä 8
    Tuotettu teho 250 Wattia
    Suoritusteho Kytkemiskapasiteetti: 320 Gbit/s
    Ominaisuudet MLDv2, OSPF, RIP, IGMPv2, IGMP, VRRP, PIM-SM, PIM-DM, IGMPv3, Spanning Tree Protocol (STP) -tuki, Rapid Spanning Tree Protocol (RSTP) -tuki, Virtual Route Redundancy Protocol (VRRP) -tuki, DHCP snooping, Access Control List (ACL) -tuki, Quality of Service (QoS), MLD-snooping, Ilmavirtaus edestä taakse, STP Root Guard, IPv4-tuki, LACP-tuki, DHCP-välitys, Remote Switch Port Analyzer (RSPAN), Per-VLAN Rapid Spanning Tree (PVRST), Dynaaminen ARP-suoja, ARP support, IP source guard, Bridge protocol data unit (BPDU), LISP Across Subnet Mode (ASM), Source-Specific Multicast (SSM), DiffServ tuki, IPv6 tuki
    Kaukohallintaprotokolla SNMP, HTTPS, SSH, CLI, Telnet
    Yhteensopivuusstandardit IEEE 802.3az, IEEE 802.3ad (LACP)
    Tunnistusmenetelmä RADIUS, TACACS+
    Huolto ja tuki Rajoitettu takuu - elinikä
    Hardware specification
    Type of Network Ports 10/100/1000/10000
    Other Ports 8
    Other Ports Type 10 Gigabit SFP+
    Switch Power
    Power type and voltage Internal power supply, AC 120/230 V
    Warranty NETGEAR lifetime warranty